Toa DP-L2 v.2.00 - Manual (Page 22)

22
[Front]
[Rear]
Liquid crystal display BACK key
NEXT key RESET key
Power switch
6.5. Restoring Default Settings
Following 2 methods are available to revert the unit's current settings to the factory-preset parameters.
(1) Method by using the power switch
Step 1. Turn the power switch off.
Step 2. Turn the power switch on while holding down both the
BACK key and NEXT key at the same time.
Note
Keep pressing both the BACK key and NEXT key till the indication "RELEASE KEYS" appears on the
LCD screen.
(2) Method by using the RESET key
Press the RESET key while holding down both the BACK key and NEXT key at the same time.
Note
Keep pressing both the BACK key and NEXT key till the indication "RELEASE KEYS" appears on the LCD
screen.