Toa DD-2000 Series Manual - Manual (Page 24)

133-22-166-6B
URL: http://www.toa.jp/
3.3. D-911 Operation
Only the D-2008SP's channels to which the D-984VC module is connected can be controlled.
Input faders Output volume control knobs
Control keys
D-911
3.3.1. Volume adjustment
Volume of the channel assigned to the D-984VC using the D-2000 Setting software can be adjusted using the
D-911’s input fader or output volume control knob.
Notes
• For channels with stereo link or group settings established at the D-2008SP, only the lowest numbered
channel in the preset link or group is enabled.
• Fader position "10" of the D-911 provides the channel gain set by the D-2008SP. As a guide, fader position
"8" provides channel gain about 10 dB lower than the set gain at the D-2008SP.
3.3.2. Contact control
Preset memory recall, Volume level up and down functions can be assigned to the
D-984VC's contacts using the D-2000 Setting Software.
Assigned functions can be implemented by pressing the Control keys 1 – 8.