Toa DD-2000 Series Manual - Manual (Page 19)

19
3.2.5. D-2008SP level indicator control (LED control)
This function turns off the level indicators on the front panel of the D-2008SP Digital Mixing Processor.
Level indicators
D-2008SP
[Operation]
Press the LED Control key, and the D-2008SP's front panel-
mounted level indicators go out.
In this event, the depressed control key goes out.
Pressing the LED Control key again causes the D-2008SP's
front panel-mounted level indicators to light.
In this event, the depressed control key lights.
Note
The figure shows an example in which "LED control" has been
assigned to Function key 5.
Lights
LED Control
Goes out
LED Control
Unlit
LED Control
Lights
LED Control
3.2.4. Switching Line Inputs (valid only when the D-936R or D-937SP module is installed)
This function switches the line inputs (In 1 – 4) of the D-936R Stereo Input Module or the D-937SP Digital
Input Module.
[Operation]
Pressing the Line Input key selects the designated line (stereo) input.
In this event, the depressed key lights.
Note
The figure shows an example in which "Line Input (In 4)" has been assigned to Function
key 4.
Lights
Line Input 4