Installation precautions, Handling precautions – Toa M-9000M2 v.2.00 User Manual
Page 11
11
5. INSTALLATION PRECAUTIONS
• Keep the M-9000M2 over 10 cm (3.94") away from objects that may obstruct air flow to prevent the unit's
internal temperature rise.
• When mounting the unit on an equipment rack
· Use the supplied rack-mounting bracket. (For the bracket attachment, refer to
)
· Have the unit well-ventilated, and be sure to mount a 1U or more size perforated panel above and below
the unit to prevent the unit's internal temperature rise.
ON/OFF
OUTPUT SEL
ON/OFF
OUTPUT VOLUME
INPUT VOLUME
POWER
UTILITY
ESC/BACK
MEMORY
ENTER
PARAMETER
8
7
6
5
4
3
2
1
INPUT SELECT
Over 10 cm (3.94”)
Over 10 cm (3.94”)
Over 10 cm (3.94”)
6. HANDLING PRECAUTIONS
• The supplied power supply cord is designed for exclusive use with this unit. Never use it with other
equipment.
• Use the unit in locations where the temperature is between –10 and +40°C or 14 and 104°F (no
condensation should be formed), and the humidity is less than 80%.
• The unit is a precision audio component. To prevent failure, avoid locations where it may be exposed to
strong shocks or vibrations.
• To clean, be sure to first disconnect the power supply plug from the AC outlet, then wipe with a dry cloth.
When extremely dirty, use a soft cloth dampened in neutral detergent. Never use benzene, thinner, alcohol
or chemically-treated towels, which may damage the unit's finish.
[Applicable products]
9000M2 Series Remote Control Module RC-011T, and Remote Control Panels ZM-9011/9012/9013/9014
Warning: These are class A products. In a domestic environment these products may cause radio
interference in which case the user may be required to take adequate measures.
Perforated panels
M-9000M2
ON/OFF
OUTPUT SEL
ON/OFF
OUTPUT VOLUME
INPUT VOLUME
POWER
UTILITY
ESC/BACK
MEMORY
ENTER
PARAMETER
8
7
6
5
4
3
2
1
INPUT SELECT