CREATIVE Sound Blaster Audigy 2 Platinum eX - Manual (Page 34)

Installing Hardware 2-9
Table 1: Description of components on Page 2- 7
Number Description
1 Surround Amplifier or powered speakers
Multichannel analog audio-video amplifier or 5.1/6.1 analog multi-speaker system,
or ordinary stereo receiver.
2 Line Out 1 jack
Connects to powered stereo speakers or an external amplifier. Also supports
headphones. Outputs front Left/Right audio channels.
3 Line Out 2 jack
Connects to powered surround speakers or an external surround amplifier with
surround inputs. Outputs Surround Left/Right audio.
4 Line Out 3 jack
Three-channel analog jack outputs Subwoofer, Front Centre and Rear Centre signals.
A 4-pole 3.5mm plug is required.
5 Digital Audio device
Devices like DAT or MD players that have a 3.5mm input jack.
6 Coaxial Analog Line In jacks
Connect to external analog stereo devices like cassette recorders, tuners or other line-
level sound sources.
7 SPDIF Digital Out jack
Outputs up to 6.1-channels or compressed AC-3 SPDIF output for connection to
digital surround decoders and amplifiers or digital speaker systems, like the Creative
Inspire 5.1
TM speaker system.
Click here or on any description in
the table to return to the main
diagram.