Tie Down LP750 - Manual (Page 8)

Page 8
To bleed master cylinder and brakes, install bleeder hose on first
wheel cylinder to be bled; if tandem axle trailer, bleed closest axle
first, and the closest brake on that axle first. Use a loose end of hose
from the bleeder valve submerged in a glass container of brake fluid
to observe bubbling (hose must be submerged into clean brake fluid
to keep air from traveling back into the brake cylinder). Loosen the
bleeder screw located in the wheel cylinder one turn, the system is
now open to the atmosphere.
Bleeding Tools Required:
5/8” Socket Wrench
5/8” Wrench
7/16” Wrench
3/8” Wrench
Adjustable Pliers
(standard and large size)
Hammer
Block of wood
Bleeding Instructions for Model LP750