TeeJet FieldPilot Install Case STX, NH TJ, NH T90X0 - Manual (Page 17)

www.teejet.com
15
FieldPilot ®
5. install the shuttle tee and adaPters
Install adapters (T & W) in the shuttle tee (P) as shown. Then disconnect the original LS hose and install
the prepared shuttle tee as shown. Reconnect the original LS hose and route hose (O) from the shuttle tee
to the LS port of the FieldPilot valve as shown.
Figure 1-8: Install the Shuttle Tee and Adapters
t
P
W
t
disconnect
original ls Hose
Connect o
o