TeeJet FieldPilot Install Case SPX 3150-3185 - Manual (Page 9)

8
www.teejet.com
FieldPilot ®
installation
If there are questions concerning the installation of the FieldPilot system on this vehicle, or due to the
changes in component specifications the parts supplied in the kit are not exactly as presented in this
document, please contact your dealer or TeeJet Customer service representative for clarification
before installation. TeeJet Technologies is not responsible for misuse or incorrect installation of the system.
NOTE: BE VERY CAREFUL TO ABSOLUTELY SECURE ALL CABLES AND HOSES SO THAT THEY DON’T
INTERFERE WITH THE MANY MOVING PARTS OF THE MACHINE!
overview of the Machine
• The FieldPilot valve will mount directly underneath the cab at the steering orbital
• Most hydraulic connections will be made at the orbital and can be best accessed from beneath the cab.
Pressure will come from the hydraulic pump at the pressure relief valve and excess flow will return to the
pressure relief valve.
• The GPS antenna will mount on the cab
• The cables will enter the bottom-right-rear of the cab
NOTE: All references to left and right are stated as if the user is seated in the driver’s seat.
Figure 1-3: Overview of the Machine
Field pilot
Valve
Hydraulic
Connections
Gps