Fieldpilot, Hose l for excess flow, Hose l for pressure – TeeJet FieldPilot Install ACGO Gleaner R62-65-72-75 User Manual
Page 13: Install excess flow hose, Install pressure hose
www.teejet.com
11
FieldPilot
®
4. install excess FlOw hOse
Connect hose
(L)
to adapter
(O)
installed in the EF port on the FieldPilot Valve. Connect the other end of
this hose to the -10JIC adapter on the hydraulic valve stack left open when the original excess flow hose
was discarded. Take care routing the hose to be sure it is clear of all drive belts and cannot rub on other
components.
Figure 1-7: Install Excess Flow Hose
Hose l for excess flow
Hose l for excess flow
5. install Pressure hOse
Connect hose
(L)
to adapter
(O)
installed in the P port of the FieldPilot valve. Connect the end of the hose
to the EF port of the Priority valve left open when the original excess flow hose was discarded.
Figure 1-8: Install Pressure Hose
Hose l for pressure
Hose l for pressure