TeeJet LH 1600 - Manual (Page 4)

F ITTING I NSTRUCTIONS LH 1600
4 LH A GRO
FITTING THE CLUTCHES AND THE CLUTCH CONTROLS
Dismount the metering shaft and insert the two clutches (with feeder wheel and
controls).
Clutches and controls are mounted so that the core output turns down and the flat
part of the housing makes contact with the hopper.
Lead the supplied cables along with the chassis tube to the junction box.
A metering shaft bearing shall be mounted as close to the clutch as possible. On
certain machine types it may be necessary to make an exchange of the force
feeds to get place for the clutches.
Fig. 3.
Fig. 4.