TeeJet LH 965 - Manual (Page 10)

LH 965 O PERATORS MANUAL
10 LH A GRO
2: TIME FUNCTIONS
TIMER: This function is used to measure the
time consumption for a certain piece of
work. The timer can be manually started
and stopped when the function is
selected. The counter can be cleared in
DATA/DELETE where there also is a
total counter for time consumption.
NOTE: Not controlled by the override
sensor.
END TIME: This function shows the time when the
job will be finished. The time is
calculated on the basis of the present
efficiency and the remaining area.
Works only if HA LEFT is encoded.
CLOCK: Time in hours:minutes:seconds. Time is
set in ”ENCODE”.
DATE: Date appears as day:month:year. Date
is set in ”ENCODE”.