TeeJet 834 Sprayer Control - Manual (Page 3)

MI 834 Programming and Operating Manual 9/99 Page 3 of 15
Programming Guidelines
Make sure that all hardware components are properly installed and tested. Before you start
the programming process you should first check if the console and all sensors are working
properly.
Important Preliminary Information
Before you begin, we recommend that you review the following Programming Guidelines that
control the programming process:
☛
The key is used to power the console ON
☛
Auto & simultaneous key combination is used to power OFF (Master boom switch
must be in the off position)
☛
Holding key for 3 seconds is used to enter programming mode
☛
Pressing the key saves the current parameter and advances to the next
programming step during programming mode
☛
The value of a parameter is changed with the
+
and keys. Holding the
+
or
key changes the parameter rapidly.