CycleOps PRO 300PT - Manual (Page 25)

25
About
3) Press [SELECT] to reenter [TEST] mode.
Press [DOWN ARROW] and press [SELECT].
4) Press [DOWN ARROW] to scroll to [LCD
TEST] and press [SELECT].
5) Press [SELECT] to end test.
6) Repeat steps 4 and 5 [BACKLIGHT], [HUB
HEART WHEEL], [TORQUE], [DATA RIDE], and
[DATA TEST].
7) Press [DOWN ARROW ] to scroll to
[RETURN] and press [SELECT] to return to
[MAIN MENU].
SELECT MODE
ABOUT
SARIS CYCLING GROUP
VERSION 01:13
800-783-7257
Test Information
1) From [MAIN MENU] press [DOWN
ARROW] to scroll to through to [TEST] and
press [SELECT].
2) Press [SELECT] and current firmware ver-
sion information is listed. For updates
please visit www.cycleops.com or contact
Saris Cycling Group 1-800-783-7257 (001
608 274 6550 international).
SELECT MODE
MAIN MENU
RETURN TO RIDE
SETUP USER RIDE
CLEAR MEMORY
TEST
SETUP
Clear Memory
Option 1-
1) In dashboard display press and hold
both [MODE] and [SELECT] for two (2) sec-
onds and press [SELECT] to execute clear.
Option 2-
1) From [MAIN MENU] press [DOWN
ARROW] to scroll to [CLEAR MEMORY] and
press [SELECT] to execute clear.
2) Press [SELECT] to execute memory clear.
SELECT MODE
CLEAR MEMORY
EXECUTE CLEAR
RETURN
Clear Memory
There are two methods to clear memory.
When the memory clear is complete, the
console will return to dashboard display.
Test Information (Current Firmware Version, LCD,
Backlight, Hub Heart Wheel, Torque, Data Ride and
Data Test)
These tests only need to be performed when instructed by customer support staff. For questions
please contact Saris Cycling Group at 1-800-783-7257 (001 608 274 6550 international).