CycleOps PRO 300PT - Manual (Page 20)

20
Settings (Averages)
These settings allow for better pacing during
Time Trial efforts by allowing for a slower update
of the display. Changing these settings applies
only the display console and does not affect the
recording rate for download
Setting (Averages) 1
1) From [MAIN MENU] press [DOWN
ARROW] to scroll to [SETUP USER RIDE] and
press [SELECT].
Setting (Averages) 2
2) Press [DOWN ARROW] to scroll through
six (6) [USER] files and press [SELECT] to
select a user file. (See "Setting User
Information" to establish a user profile).
SELECT MODE
MAIN MENU
RETURN TO RIDE
SETUP USER RIDE
CLEAR MEMORY
TEST
SETUP
SELECT MODE
R ETURN T O R IDE
1 USER A
2 USER B
3 USER C
4 USER D
5 USER E
6 USER F
Setting (Averages) 5
5) Press [SELECT] to enter [WATTS AVG].
Press [UP ARROW] or [DOWN ARROW] to
determine the number of previous data
points used (1, 2, 3, 5, 10, 30) to determine
the average metric display on the console.
This function applies only to console data
averages and does not apply to down-
loaded information. Press [SELECT ] to
accept changes and reenter the scrolling
menu.
Setting (Averages) 3
3) Press [DOWN ARROW] to scroll to [SET-
TINGS] and press [SELECT].
Setting (Averages) 4
4) Press [DOWN ARROW] to scroll to [AVER-
AGE] and press [SELECT].
SELECT MODE
A
VERAGE
WATTS AVG 2
SPEED AVG 3
CADENCE AVG 5
HEART AVG REGULAR
TORQUE AVG 1
RESET
RETURN
SELECT MODE
CYCLE COMPUTER
POWER ZONE
HEART RATE ZONE
USER INFORMATION
SETTINGS
RETURN
SELECT MODE
S ETTINGS
COMPUTER
AVERAGE
ZEROS
RETURN