CycleOps PRO 300PT - Manual (Page 22)

22
SELECT MODE
MAIN MENU
RETURN TO RIDE
SETUP USER RIDE
CLEAR MEMORY
TEST
SETUP
SELECT MODE
R
ETURN
T
O
R
IDE
1 USER A
2 USER B
3 USER C
4 USER D
5 USER E
6 USER F
SELECT MODE
CYCLE COMPUTER
POWER ZONE
HEART RATE ZONE
USER INFORMATION
SETTINGS
RETURN
Settings (Zeros)
These settings determine if zero readings will be
included in average readings. For example,
when coasting zero powering readings are
recorded. This setting determines if these zero
coasting readings are included in the average
console display.
Settings (Zeros)
1) From [MAIN MENU] press [DOWN ARROW]
to scroll to [SETUP USER RIDE] and press
[SELECT].
Settings (Zeros)
2) Press [DOWN ARROW] to scroll to through
six (6) [USER] files and press [SELECT] to
select a user file. (See "Setting User
Information" to establish a user profile).
Settings (Zeros)
3) Press [DOWN ARROW] to scroll to [SET-
TINGS] and press [SELECT].
SELECT MODE
S ETTINGS
WATTS AVG ZEROS YES
SPEED AVG ZEROS YES
CAD AVG ZEROS
YES
RESET
RETURN
Settings (Zeros)
4) Press [DOWN ARROW] to scroll to [ZEROS] and
press [SELECT].
5) Press [SELECT] to enter [WATTS AVG ZEROS].
Press [UP ARROW] or [DOWN ARROW] to toggle
between [YES] or [NO]. Press [SELECT] to accept
changes and reenter the scrolling menu.
6) Repeat steps 3, 4, and 5 for [SPEED AVG ZEROS]
and [CAD AVG ZEROS]. Press [SELECT] to accept
changes and reenter scrolling menu.
7) To reset user settings press [DOWN ARROW] to
scroll to [RESET] and press [SELECT].
SELECT MODE
S ETTINGS
WATTS AVG ZEROS YES
SPEED AVG ZEROS YES
CAD AVG ZEROS
YES
RESET
RETURN
Settings (Zeros)
8) To begin a ride, press [DOWN ARROW] to
scroll to [RETURN] and press [SELECT]. Press
[DOWN ARROW] to scroll to [RETURN] and
press [SELECT].