CycleOps PRO 300PT - Manual (Page 18)

18
Settings 3
3) Press [DOWN ARROW] to scroll to [SET-
TINGS] and press [SELECT].
Settings 2
2) Press [DOWN ARROW] to scroll to [USER]
files and press [SELECT] to enter the file.
(See "Setting User Information" to establish
a user profile).
Settings 4
4) Press [SELECT] to enter [COMPUTER]
mode.
Settings 1
1) From [MAIN MENU] press [DOWN
ARROW] to scroll to [SETUP USER RIDE] and
press [SELECT].
Settings 5
5) Press [SELECT] to enter [RATE]. Use [UP
ARROW ] or [DOWN ARROW ] to toggle
between 1, 2, 5, 10, 30 seconds for the
recording rate of the console. Press
[SELECT] to accept changes and reenter
scrolling menu. NOTE: Different recording
rates yield different amounts of total stor-
age time. Refer to the chart on left to select
the most appropriate storage rate. See
Table 2 at left.
SELECT MODE
S
ETTINGS
COMPUTER
AVERAGE
ZEROS
RETURN
SELECT MODE
CYCLE COMPUTER
POWER ZONE
HEART RATE ZONE
USER INFORMATION
SETTINGS
RETURN
SELECT MODE
MAIN MENU
RETURN TO RIDE
SETUP USER RIDE
CLEAR MEMORY
TEST
SETUP
SELECT MODE
C
OMPUTER
RATE 10
MPH-KPH MPH
ODOMETER 00255
AUDIBLE OFF
RETURN
Settings (Recording
Rate, Speed, Odometer,
Audible)
SELECT MODE
R
ETURN
T
O
R
IDE
1 USER A
2 USER B
3 USER C
4 USER D
5 USER E
6 USER F
Table 2