CycleOps PRO 300PT - Manual (Page 12)

12
SELECT MODE
Console Setup 1
1) From the dashboard display press [UP
ARROW] or [DOWN ARROW] to move the cur-
sor to [MENU] and press [SELECT].
CLOCK 02:06:07P
MPH
CAD
MENU
WATTS HR
H
Console Setup
SELECT MODE
Console Setup 2
2) Press [SELECT] to enter [RETURN TO
RIDE].
MAIN MENU
RETURN TO RIDE
SETUP USER RIDE
CLEAR MEMORY
TEST
SETUP
SELECT MODE
Console Setup 3
3) Press [DOWN ARROW] to scroll through
six (6) [USER] files and press [SELECT] to
choose the user. (See "Setting User
Information" to establish a user profile).
R
ETURN
T
O
R
IDE
1 USER A
2 USER B
3 USER C
4 USER D
5 USER E
6 USER F
Console Setup 4
4) Press [DOWN ARROW] to choose ride
type and press [SELECT] to return to dash-
board display.
Ride Type Selection
Press any button to wake up and turn on the
console. If you are using it for the first time,
all data will be stored under [USER A] with
the default settings for a 150 lb male born on
Jan 1, 2004. You may need to reset the con-
sole if there is data from a previous ride
stored on the console (see "Clear Memory"
for details). NOTE: Parameters such as weight
and age do not affect power output readings
on the console. These settings apply only
when analyzing the data on your PC.
SELECT MODE
R
IDE
T
YPE
CYCLE COMPUTER
POWER ZONE
HEART RATE ZONE