SUUNTO OCTOPUS II - Manual (Page 37)

37
Display II (Fig. 3.20)
• The present depth in meters [ft] (Fig. 3.20, a).
• The desaturation/ no-flying time in hours and minutes is shown next to the
non-blinking airplane in the center window of the display (Fig. 3.20, b).
If you start a new dive after less than 10 minutes at the surface, the instrument interprets
this as a continuation of the previous dive. The DIVING display will return, the DIVE
number will remain unchanged, and DIVE TIME will begin where it left off. After 10
minutes on the surface, subsequent dives are by def inition repetitive. The DIVE counter
displayed in the dive planning mode will progress to the next higher number if you make
another dive after 10 minutes of surface interval time.
DIVE PLANNING
You may, at any time on the surface, enter the DIVE PLANNING mode in the manner
described in Section 3.3.2, by touching the PLAN/ON and COM contacts. The dive
computer will take into account the residual nitrogen caused by your previous dives.
The no-decompression times given for different depths will therefore be shorter than
before your first dive (Fig. 3.7).
You may also read the time by touching the TIME/MODE and COM contacts, as de-
scribed in Section 3.3.3 (Fig. 3.8).
Fig. 3.20 SURFACE MODE AFTER A
DIVE, DISPLAY II
The desaturation time/ no-flying time,
indicated by a non-blinking airplane symbol,
is 11 h 25 min (b). The present depth is 0.0
m [0 ft] (a).
LOG HIS ALT SET PLAN
A
S
C
R
A
T
E
m
C
A1
NO
DIVE
TIME
a
b