SUUNTO COBRA User Guide - Manual (Page 96)

8. CARE AND MAINTENANCE OF MY SUUNTO DIVING COM-
PUTER
The SUUNTO dive computer is a sophisticated precision instrument. Although it is
designed to withstand the rigors of scuba diving, you must treat it with the same
proper care and caution as any other precision instrument.
WARNING
The built-in depth sensor is a sophisticated precision component.
Keep the area around the depth sensor clear from dirt, sand, dust
or other substances. Rinse the device thoroughly with fresh water
and dry it with a soft towel. Never use pins, needles or other ob-
jects to clean the depth sensor.
• WATER CONTACTS AND PUSH BUTTONS
Contamination or dirt on the water contacts/connector or push buttons may prevent
the automatic activation of the Dive Mode and cause problems during the data
transfer. Therefore, it is important that the water contacts and push buttons are
kept clean. If the water contacts are active (AC text remains on display) or the Dive
Mode activates on its own, the reason for this is probably contamination or invisible
marine growth, which may create an electric current between the contacts. It is
important that the dive computer is carefully washed in fresh water after the day’s
diving is completed. The contacts can be cleaned with fresh water and, if necessary,
a mild detergent and a soft brush. Sometimes it might be necessary to remove the
instrument from the protective boot for cleaning.
• CARE OF YOUR DIVE COMPUTER
NEVER try to open the case of the dive computer. •
96