SUUNTO COBRA User Guide - Manual (Page 19)

• Activates the electroluminescent backlight (in the Surface mode hold down the
mode button for more than two (2) seconds, during a dive for one (1) second).
PLAN (arrow up) button
•
Activates the timekeeping display, if the display is blank.
• Activates the Dive Planning in the Surface mode
• Makes a special bookmark in the profile memory during a dive
• Scrolls up the options ( increases values)
TIME (arrow down) button
•
Activates the timekeeping display, if the display is blank.
• Activates the Time display(s) and/or alternative display(s).
• Scrolls down the options ( decreases values)
The dive computer is controlled with the SMART (MODE/On/Backlight/Select/
OK/Quit) and the PLAN
and TIME push buttons and with the water contacts as
follows:
Activation: Press the SMART (On) button or immerse the instrument in water for five
(5) seconds.
Dive Planning: In the Surface mode, press the PLAN button.
Menu modes: Press the SMART (MODE) button.
The display is illuminated by holding down the SMART button for more than two
seconds.
19