Ascent rate indicator – SUUNTO COBRA User Guide User Manual
Page 60
![background image](/manuals/712638/60/background.png)
Red Zone– As all of the bars appear (red zone), your no-decompression stop time
has become zero and your dive has become a decompression stop dive (for more
information see Section 6.1.6. Decompression dives).
6.1.5. Ascent rate indicator
The ascent rate is displayed graphically along the right hand side with a vertical bar.
When the maximum allowed ascent rate is exceeded, the fifth SLOW warning segment
and the STOP sign appear and the depth reading starts to blink, indicating that the
maximum ascent rate has been exceeded continuously or that the current ascent rate
is significantly above the allowed rate.
Table 6.1. Ascent rate indicator
The equivalent ascent speed
Ascent rate incicator
Below 4 m/min / 13 ft/min
No segment
4–6 m/min / 13–20 ft/min
One segment
6–8 m/min / 20–26 ft/min
Two segments
8–10 m/min / 26–33 ft/min
Three segments
10–12 m/min / 33–39 ft/min
Four segments
Above 12 m/min /39 ft/min or continuously 10
m/min / 33 ft/min
Four segments, the SLOW seg-
ment, blinking depth reading, the
STOP sign and an audible alarm
60