SUUNTO AMBIT - Manual (Page 78)

To deactivate the compass, go back to the options menu and set the compass
off.
12.6.5 Using interval timer
You can add an interval timer to each custom exercise mode in Movescount.
To add the interval timer to a custom mode, go to the GEAR section of your
profile and select Customization. The next time you connect your Suunto
Ambit to your Movescount account, the interval timer will be synchronized to
the device.
You can specify the following information in the interval timer:
●
interval types ( HIGH and LOW interval)
● the duration or distance for both interval types
● the number of times the intervals are repeated
NOTE: If you do not set the number of repetitions for the intervals in
Movescount, the interval timer will continue until it has been repeated 99 times.
To activate/deactivate the interval timer:
1. While you are in a custom exercise mode, keep [Next] pressed to access
the options menu.
2. Scroll to ACTIVATE with [Light Lock] and select with [Next].
3. Scroll to Interval with [Start Stop] and select with [Next].
4. Press [Start Stop] or [Light Lock] to set the interval timer On/Off and accept
with [Next].
When the interval timer is active, the interval icon is shown on the top of
the display.
78