SUUNTO AMBIT - Manual (Page 36)

8.3.3 Navigating to a point of interest (POI)
Suunto Ambit includes GPS navigation which allows you to navigate to a
pre-defined destination stored as a POI.
NOTE: You can also navigate when you are recording an exercise, see Section
12.6.6 Navigating during exercise on page 79.
To navigate to a POI:
1. Press [Start Stop] to enter the start menu.
2. Scroll to
NAVIGATION using [Start Stop] and enter with [Next].
3. Press [Next] to select POIs (Points of interest).
The device displays the number of saved POIs and free space available for
new POIs.
4. The POIs are grouped by type. Scroll to the desired POI type with [Start
Stop] or [Light Lock]. Select with [Next].
5. The device displays all the POIs saved under the selected POI type. Scroll
to the POI you wish to navigate to with [Start Stop] or [Light Lock] and select
with [Next].
6. Press [Next] to select Navigate.
If you are using the compass for the first time, you need to calibrate it. For
more information, see Section 10.1 Calibrating compass on page 57. After
activating the compass, the device starts searching for a GPS signal and
displays GPS found after acquiring the signal.
7. Start navigating to the POI. The device displays the following information:
● arrow pointing to the direction of your destination (turn left/right
indicator)
36