SUUNTO AMBIT - Manual (Page 69)

Using a heart rate belt enables the following additional information after
exercise:
●
calories burned during exercise
● average heart rate
● peak heart rate
● recovery time
Troubleshooting: No heart rate signal
If you lose the heart rate signal, try the following:
●
Check that you are wearing the heart rate belt correctly (see Section 12.4
Putting on heart rate belt on page 69).
● Check that the electrode areas of the heart rate belt are moist.
● Replace the battery of the heart rate belt, if problems persist.
● Re-pair your heart rate belt with the device (see Chapter 15 Pairing POD/heart
rate belt on page 95).
● Machine-wash the textile strap of the heart rate belt regularly.
12.4 Putting on heart rate belt
NOTE: Suunto Ambit is compatible with Suunto ANT Comfort Belt.
Adjust the strap length so that the heart rate belt is tight but still comfortable.
Moisten the contact areas with water or gel and put on the heart rate belt.
Ensure the heart rate belt is centered on your chest and the red arrow is pointing
up.
69
en