Sure Heat Sonoma CGR30 Natural Gas Conversion Kit - Manual (Page 8)

Sonoma CGR30
Natural Gas Conversion Instructions
Converting the Side Burner to NG
1. Loosen the gas supply hose attached to the side
burner valve using an adjustable wrench. (See
Fig. 29)
2. Once removed, the LP regulator and hose can be
completely removed from the grill. (See Fig. 29)
3. Loosen the aluminum line going from the side
burner valve to the side burner, using and
adjustable wrench. (See Fig. 30)
Note: First remove the aluminum line fitting, then
remove the fitting attached to the valve.
Remove the aluminum line completely from the side
burner valve (See Fig. 31)
4. Remove the control knob from the front of the side
burner. (Use a pair of pliers with a cloth to avoid
any scratches or dents on the knobs) (See Fig. 32)
Note: Metal knobs on the 44” grill can be
removed by hand.
5. Remove the screw holding the bezel in place on
the side burner and remove bezel from front of
side burner. (See Fig. 33)
Fig 30
Fig 33
Fig 32
Fig 31
Screw
Bezel
Gas Supply Line
Valve Assembly
Underside of
right side
burner shelf
Loosen
this first.
Loosen this
second.
Fig 29
Flex Line
Valve Assembly