Sure Heat CVS303 Natural Gas Conversion Kit - Manual

LP/NATURAL GAS SAFETY PILOT KIT
MODEL: CVS-303
Supplemental Installation Instructions for use on
Emberglow Natural Gas Vented Log Sets
FOR INFRARED BURNER SYSTEMS ONLY
NOTE: This kit is for Natural Gas and L.P. Gas applications. For L.P. or Propane Gas installation see separate
instructions packaged with necessary hardware. (Do not use the Natural Gas orifice supplied with this kit on
L.P. or Propane Gas Installations as improper combustion will occur.
IMPORTANT
Read and follow all instructions carefully as these supplemental Pilot Assembly instructions are to be used in
conjunction with the General Installation Instructions supplied with all Emberglow Natural Gas log sets.
PARTS LIST & ILLUSTRATION
Part No. Description Part No. Description Part No. Description
1 Control Knob 12 Pilot Orifice - Natural Gas
20a
3/8” Natural Gas Orifice -
18” Small Center Hole
3 Gas Control Valve 14 Pilot Supply Line Nut
5 Thermocouple Lead 15 Heat Shield
6 Pilot Gas Supply Line 16 Lock Nut
20b
3/8” Natural Gas Orifice -
24” & 30” Large Center Hole
7 Pilot Burner 17 90 Degree Street Elbow
8 Pilot Bracket 18 3” Pipe Nipple
9 Sheet Metal Screw (1) 19 3/8” Female Elbow (2) 21 3/8 Flare to 3/8 NPT
National Code requirements mandate the use of a Pilot Safety Valve on all L.P. or Propane gas
applications. These regulations must be followed on all installations of this type.