StarTech.com SV1631DUSBU - Manual (Page 16)

13
Manual Scan enables you to manually switch back and forth between
the powered computers:
Left , left , F2
Press the < UP> arrow key to select the previous computer and the
< DOWN> arrow key to select the next computer. Press any other key
to abort Manual Scan mode.
NOTE: Scan Type determines whether an eye-marked computer is to
be displayed during Auto Scan.
To adjust Scan Rate, which sets the duration before switching to the
next computer in Auto Scan:
Left , Left , F3
The switch will beep one to four times indicating the scan interval of 3,
8, 15 and 30 seconds respectively.
Change Leading Hotkey
The default leading hotkey sequence involves pressing the left
<
CTRL> twice in succession (e.g. left <CTRL>, left <CTRL>). This
can be changed to the right < CTRL> key instead, to avoid accidental
activation due to using the left < CTRL> key for functions such as
Copy/Paste.
To change the leading hotkey sequence to Right <
CTRL>:
Left , Left , hold , press Right
All hotkey commands that previously required pressing the Left
<
CTRL> will be switched to requiring the right <CTRL> instead.
To change the leading hotkey sequence back to Left < CTRL>:
Right , Right , hold , press Left