StarTech.com SV1631DUSBU - Manual (Page 12)

9
When Auto Scan detects any keyboard or mouse activity, it suspends
the scanning till activity stops; it then resumes with the next computer
in sequence. To abort Auto Scan mode, press the left <
CTRL> twice,
or, press any front button. Scan Type and Scan Rate set the scan
pattern. Scan Type (<
F4>: More\Scan Type) determines if scanned
computers must also be eye mark selected. Scan Rate(< F4>: More\
Scan Rate) sets the display interval when a computer is selected
before selecting the next one.
Manual Scan
Scan through power-on computers one by one by keyboard control.
You can type (<
F4>: More\Scan Type) to determine if scanned
computers must also be eye mark selected. Press the < UP> arrow
key to select the previous computer and the < DOWN> arrow key to
select the next computer. Press any other key to abort Manual Scan
mode.
Scan Type:
Ready PC + N: In Scan mode, scans through power-on computers
and those with the eye mark on the selected ports.
Ready PC: In Scan mode, scans through all power-on computers.
N
only: In Scan mode, scans through any selected computer
regardless of computer power status with an eye mark.
Scan Rate: Sets the duration of a computer displayed in Auto Scan
mode. The options are 3 seconds, 8 seconds, 15 seconds and 30
seconds. The non-volatile memory stores the Scan Rate setting.
Hotkey Menu: When you hit the left <CTRL> key twice within two
seconds, the Hotkey Menu appears displaying a list of hot-key
commands if this option is On.
The Hotkey Menu can be turned Off if you prefer not to see it when
the left <
CTRL> key is hit twice. The non-volatile memory stores the
Hotkey Menu setting.