StarTech.com SV1631DUSBU - Manual (Page 13)

10
CH Display:
Auto Off: After you select a computer, the channel address and
name of the computer will appear on the screen for 3 seconds then
disappear automatically.
Always On: The channel address and name of a selected computer
and/or OSD status displayed on the screen all the time. The non-
volatile memory stores the CH Display setting.
Position: The position of the selected computer name and/or OSD
status displayed on screen during operation. The actual display
position shifts due to different VGA resolution, the higher the
resolution the higher the display position. The nonvolatile memory
stores the Position setting.
Upper Left, Upper Right
Middle
Lower Left, Lower Right
Country Code for Sun:
Sun keyboards of different languages have different layouts. The KVM
switch is able to emulate a Sun keyboard for a specific language type
or country such as Arabic, Belgian, US, Yugoslavia, etc. Select the
proper country code that matches all of your Sun computers.
NOTE: The country code must be set prior to powering up the Sun
computer. Not performing this step prior to power-up could cause the
system to malfunction.
Max. Resolution: It supports widescreen, and you can adjust the
monitor resolution under this sub-menu. The following selections are
available: 1024x768, 1280x1024, 1600x1200, 1920x1440
Widescreen resolutions: 1920x1080, 1366x768, 1280x720, 854x480
and “DDC2B Disable”.
Function Key : To switch the Sun mark of a port on or off indicating
the computer is a Sun server as shown in Figure
12. Sun servers have more keys on the keyboard
than a PC. When a Sun-marked port is selected,
the KVM Switch starts to translate the keys from a
PC keyboard to a Sun keyboard. See the section
entitled Sun Keyboard Mapping for further detail.