Hot-key commands – StarTech.com SV1631DUSBU User Manual
Page 14
11
NOTE: It is unnecessary to switch the Sun mark ON or OFF if an
authentic Sun keyboard is being used on the console. In other words,
you must ensure that the Sun-marked port has not been selected if you
are already using a Sun keyboard.
With different types of keyboard and computer, the Sun Mark must be
set up in compliance with the following instruction:
Keyboard Type
Computer Type
Sun Mark
USB (non-Sun)
PC/Mac
No
USB (non-Sun)
Sun
Yes
USB (Sun keyboard)
PC/Mac
No
USB (Sun keyboard)
Sun
Yes
ESC: To exit the OSD, press the <ESCAPE> key
Hot-key commands
Hot-key command is a short keyboard sequence used to select
a computer, to activate computer scan, etc. StarView interprets
keystrokes followed by one or two more keystrokes. A built-in buzzer
generates a high-pitch beep for a correct hotkey command, otherwise,
one low-pitch beep for an error and the bad key sequence will not be
forwarded to the selected computer.