Source Audio Soundblox Pro Poly-Mod Filter - Manual (Page 21)

BACKPAGE PARAMETERS
The Poly-Mod Pro has some additional editable parameters accessible
via the special Backpage mode. Pressing the
MOD SOURCE and TAP
TEMPO ENABLE buttons simultaneously enables the Backpage mode, as
indicated on the main control panel. All Modulation Source LED s and the
Tap Tempo Enable LED will be lit to indicate that the unit is in Backpage
mode. The Backpage mode can be exited by pressing the two buttons
simultaneously again.
In Backpage mode, the EQ controls and the Effect knob take on different
functions and the displays will change to indicate the parameter values.
For the
EQ display, there are two letter abbreviations above the columns
that indicate the parameter controlled in Backpage mode. Select the
parameter to be edited with the left and right Band Select buttons and
adjust the value with the knob.
To return to the default Backpage settings, press both Band Select but-
tons at the same time. All Backpage parameters will return to factory
default settings. Unless otherwise noted, all Backpage parameters are
save per preset.
125 250 500 1K 2K
(XD) (XC) (OE) (VA) (Q) (EL) (LS)
4K 8K
+12
-12
0
< >
USER
MOD
SOURCE
TAP TEMPO
ENABLE
(HOLD)
CALIBRATE
BACKPAGE
MODE
ENVELOPE
LFO
HOT HAND
Backpage Parameters | 21
- Continued