Source Audio Soundblox Pro Poly-Mod Filter - Manual (Page 20)

MIDI CONTROL
The Poly-Mod Pro can optionally be controlled by an external MIDI con-
troller, such as the Hot Hand MIDI-EXP controller, through the MIDI input.
All of the knob parameters as well as several other Backpage parame-
ters are controllable via
MIDI Continuous Controller messages. Individual
presets can also be selected by MIDI Program Change messages. The
unit can also be put into bypass in this way. The following table describes
the use of the MIDI input.
MIDI implementation
Note: Presets can be remapped to alternate program change values.
Please visit the Poly-Mod Pro product page at www.sourceaudio.net for
details.
The MIDI Channel is selectable as a Backpage parameter. Please see the
Backpage Parameters section for more details.
Note: MIDI Channel is a global setting and will not be saved per preset.
Parameter Message Type Data Value
Enable Preset 1 Program Change 001
Enable Preset 2 Program Change 002
Enable Preset 3 Program Change 003
Enable Preset 4 Program Change 004
Enable Preset 5 Program Change 005
Enable Preset 6 Program Change 006
Disable Preset – Bypass Program Change 007
20 | MIDI Control
Parameter Message Type Data Value 1 Data Value2
Frequency Continuous Controller 020 0–127
Depth Continuous Controller 021 0–127
Wet/Dry Mix Continuous Controller 022 0–127
Speed Continuous Controller 023 0–127