SilentKnight 5660 Silent Knight Software Suite - Manual (Page 20)

5660 Silent Knight Software Suite
16 P/N 151240
Job Status
Jobs or accounts listed in the Queue window are assigned a status. The chart below
describes all possible status types.
Table 6: Queue Job Status
Status Description
Waiting The job is waiting for processing. Another job is currently being
processed or the job is timed to execute at a later time.
Error An error occurred during processing. No data was transferred. See
page 22 for more information.
Processing The job is currently processing, for example, sending or receiving
data.
Complete The job has completed successfully. Completed jobs remain on the
queue until an operator deletes them.
Aborted by
User The job was cancelled during processing by an operator. Aborted by
User jobs remain on the queue until an operator deletes them.
Timed Out The job was not completed because communication was not
established during the programmed timeframe.
Security Not
Granted The panel did not answer the call because an incorrect password was
used by the operator who attempted to process the call.
No Carrier or
No Dialtone The job was not processed because communication was not
established. This message can indicate several problems. See
page 22 for more information.
Modem Error The job was not processed because the software detected a problem
with the modem. This message could indicate that modem is not
turned on, needs to be initialized, or another problem. See page 22
for more information.
Busy Signal The job was not processed because the communication device
encountered a busy signal when attempting to call.
No Answer The job was not processed because the initiating communication
device did not receive an ACK signal.
Detector
Status Not
Supported The detector status feature is not available for Rev. 1.1 panels;
Revision 1.2 and later support the feature. If you attempt to run the
Upload Detector Status feature on a Rev. 1.1 5820XL panel, you will
receive this message.