Shellab SMO28-2 - Manual (Page 6)

6 | P a g e
RECEIVING YOUR OVEN
Before leaving our factory, all SMO ovens are packaged in high-quality shipping materials to
provide protection from transportation-related damage.
When an oven leaves our factory, safe delivery becomes the responsibility of the carrier. Damage
sustained during transit is not covered by the oven
’s warranty.
When you receive your SMO oven, inspect it for concealed loss or damage to its interior and
exterior. If you find any damage to the oven, then
follow the carrier’s procedure for claiming
damage or loss.
I NSPECTING THE S HIPMENT
Carefully inspect the shipping carton for damage. Report any damage to the carrier service that
delivered the SMO oven. If the carton is not damaged, open the carton and remove the contents.
The unit should come with an Installation and Operation Manual, warranty card, and a Certificate of
Compliance.
Verify that the correct number of shelves, shelf slides, and leveling feet have been included (see
the following table for quantities).
Included accessories
Model Shelves Shelf Clips Leveling Feet
SMO14-2 (FX14-2) 3 12 4
SMO28-2 (FX28-2) 6 24 4
Carefully check all packaging before discarding. Save the shipping carton until you are certain that
the unit and its accessories function properly.
R ETURNING THE S HIPMENT
If you must return the oven for any reason, first contact your service representative for a return of
material authorization (RMA). You must provide the
unit’s data plate information. See Recording
Data Plate Information below.
R ECORDING D ATA P LATE I NFORMATION
Locate the data plate on the back of the oven next to the power inlet. The data plate contains the
oven model number and serial number. Enter this information below for future reference.
Date Plate Information
Model Number
Serial Number