Shellab BACTROX - Manual (Page 16)

__________________________________________________________________________
Bactrox Operations Manual 16

Day two – remove beaker in the chamber and replace with the second beaker of Anatox
(also new).

Day three – reactivate the first beaker of Anatox by heating at 160 
C for 2 hours. Then
replace the beaker in the chamber with this reactivated beaker.

Day four – six months – continue switching the reactivated beakers daily until six
months is complete, then discard the old Anatox and repeat the procedure again.
16. ACCESSORIES
Tank Switch Chamber Stand
Switches and monitors dual gas tank supply. Provides
automatic switch-over to second gas tank alarm
sounds when both tanks are empty. Tanks can be
switched manually at any time. Provides work bench to support Bactrox chambers.
Chamber Stand height 30”. Stands feature locking
casters and storage space.
Model # 2002-B
Nitrogen Gas Regulator CO2 Gas Regulator
Optional accessory used in a two gas chamber
Part # 7150500 Optional accessory used in a two gas chamber
Part # 7150500
Cleaner Plexiglas Cleaner
Benzalkonium Chloride #1060503-8 oz size
Plexiglas Scratch Remover
#1060504-8 oz size
ACCESSORIES PARTS LIST
Catalog No. Product
5110729 Petri-Plate Rack 2x13
9990738S
9990738M
9990738L
Sleeves, Complete
Small
Medium
Large
9490507 UV Light Source
9490512 Start Up Kit
3600500 Rubber Cuffs, Sm Size 7
3600501 Rubber Cuffs, Med Size 8
3600502 Rubber Cuffs , Lrg Size 9
6000501 O-Ring For Door
6000504 O-Ring For Cuff
3450506 Gasket-Airlock
3600513 Nitrile Gloves-Size 7
3600514 Nitrile Gloves-Size 8
3600515 Nitrile Gloves-Size 9
3600525 Nitrile Cuffs-Size 7
3600526 Nitrile Cuffs-Size 8
3600527 Nitrile Cuffs-Size 9
7200502 Rubber Cuff Plugs