Installing the sleeve assemblies, Chamber entry, Operation (continued) – Shellab BACTRONEZ User Manual
Page 34
34 |
P a g e
OPERATION (CONTINUED)
I
NSTALLING THE
S
LEEVE
A
SSEMBLIES
Prior to verifying the achievement of an anaerobic atmosphere, install the arm sleeve assemblies in
order to access the chamber without introducing oxygen.
The order of the doors and the sides do not matter.
1. Unroll the large opening of a sleeve over the plastic lips of the arm port door opening. The
sleeve should at least stretch to the base of the barb adaptor.
2. Secure the sleeve to the arm port using the 48 inch (121cm) self-griping strap included with
the sleeve assembly. Place the strap between the outside lip and the brass gas-and-
vacuum line barb adaptor.
3. Repeat the process for the 2
nd
sleeve assembly and arm port.
Note: Sleeve assemblies can be left attached to the BACTRONEZ when not in use. No stowing
procedure is required.
Figure 23: Mounted Sleeve Assemblies