Reznor SDH Parts Manuals - Manual (Page 29)

Form P-PREEVA, P/N 263985R7, Page 29
Cabinet Parts
- Mixing Box
CODE 255 -
Damper Assembly
CODE 260D/261K - Door (one hinged on each side
of the mixing box on an indoor unit (illustrated); one
slide-off door on the control side of an outdoor unit)
CODE 256 -
Door Latch
CODE 257 -
Door Latch
Pull
CODE 258 -
Door Hinge
(2 per door)
CODE Description
RDH 75 100 125 150 175 200 225 250 300 350 400A
RXH 000A 000B 000C 000D 000E
REH 10A/20A
/40A
15B/30B
/60B
N/A
30D/60D/
90D/120D
40E/80E/
120E
249
Outside Air Damper
Assly - 30% Opening
(Options GE1 & GE2)
211419 37712 211419 37713 37715
23"x8.3" 26.625"x
8.125"
23"x8.3"
34.875"x
8.125"
45.875"x
8.125"
249A Hood Top 215172 215173 215174 215175 215176
249B Right Side 215177 215178
249C Left Side 215179 215180
249D Screen 215181 215182 215181 215183 215184
Mixing
Box
CODE 249 -
Factory-installed
30% Hood
in Option GD6
NOTE: See page 27 for Option AS2
field-installed hood designed for
GE Options with large opening for
outside air.
Mixing Box with an Economizer Logic
Module used in Options GE21 and GE22
(Sensors, CODE 243, are field installed.)
CODE 241 -
Economizer
Logic
Module
installed
30% Outside
Air Hood in
Option GD6
260M / 261R
Code Description
PDH/SDH/RDH 75/100 125/150 175/200/225 250/300 350/400
SHH -- -- 130/180 260 350
PXH/RXH 000A 000B 000C 000D 000E
PEH/REH 10A/20A/40A 15B/30B/60B N/A 30D/60D/90D/20D 40E/80E/120E
255 Dampers (purchased damper assy used in both a return air and/or outside air
opening)
211420 12634 211420 15870 12640
23" x 18.3" 26.625" x 18.5" 23" x 18.3" 34.875" x 18.5" 45.875" x 18.5"
256 Door Latch 204469 (2 per door)
257 Door Latch Pull 204470 (2 per door)
258 Door Hinge - Indoor Models 210029 (2 per door)
260 Indoor Mixing Box Cabinet Components are the same for left and right side controls. Parts listed are uninsulated unless noted.
260A Left Corner
For left or right
side controls
(AJ1 or AJ2)
211118 211119
260B Right Corner 211116 211117
260C Door (no insulation or hardware) (2) 211106 (2) 211107
260D
Door Assy w/insulation (AY2), latches, and hinges (2) 214984 (2) 214985
Door Assy w/double wall & insulation ( AY3) & latches (2) 214986 (2) 214987
Door Assy w/double wall & high density insulation (AY3H) &
latches
(2) 214988 (2) 214989
260E Top 211088 211089 211088 211090 211091
260F Top Liner 212223 212224 212225 212226 212227
260G Damper Plug (fills unused opening) 211219 211220 211219 211221 211222
260H Damper Plug in Liner 212232 212233 212232 212234 212235
260J Bottom 211102 211103 211102 211104 211105
260K Bottom Liner 212228 212229 212228 212230 212231
260L Front Post Liner 213384 213385
260M End Panel 211092 211093 211094 211095 211096
260N End Panel Liner 212218 212219 212220 212221 212222
260P Damper Support Top/Btm (2) 211213 (2) 211214 (2) 211213 (2) 211215 (2) 211216
260Q Damper Support Side (2) 211218
260R End Damper Support (2) 211123 (2) 211124 (2) 211123 (2) 211125 (2) 211212