Reznor Q6SD Option - Installation - Power Exhaust - Lt Commercial - Manual (Page 2)

FIGURE 5
INSTALLATION
INSTRUCTION
INSTALLATION INSTRUCTIONS FOR
547842 / 555578 / 555579 / 547843 / 555580 / 555581 / 555651
POWER EXHAUST USED WITH R4GM 072
P6SD, Q6SD, R6GD 024-060 UNITS
FIGURE 4
CONTROL ACCESS
EXHAUST AIR OPENING
BAROMETRIC RELIEF HOOD
BAROMETRIC RELIEF HOOD
NEW FRESH AIR HOOD
ECONOMIZER INSTALLED
5. Secure power exhaust to the unit face with
screws provided.
6. Install new fresh air hood in front of
economizer.
7. Restore power to unit and check for proper
operation.
CONTROL ACCESS
BAROMETRIC RELIEF HOOD
RETURN DAMPERS
RETURN DAMPERS
END SWITCH
4. Route end switch wires through bottom
opening in economizer. Secure with screws
p r o v i d e d t o th e r e t u r n d a m p e r o f
FIGURE 3