Ram Trucks 2013 3500 - User Guide - Manual (Page 41)

Max Load Inflation (Indicator Light Off)
• If the passenger and cargo weights exceed the Light Load Pressure Definition
shown on the Supplemental Tire Pressure Information Label, adjust tires to the
correct “Max Load Inflation” pressure. If the indicator is on, reset by pushing the
switch once.
• If the tire pressure monitoring light and a “low tire” message appears in the
cluster, inflate the tire pressures to the “Max Load Inflation” setting as indicated
in the Supplemental Tire Pressure Information Label.
• After any tire pressure adjustment, the vehicle may need to be driven for up to 20
minutes at speeds over 15 mph for the tire pressure information to be updated, or for a
low tire pressure warning to go out.
• For additional information, refer to the Owner's Manual on the DVD.
POWER SLIDING REAR WINDOW
• The switch for the power sliding rear
window is located on the overhead con-
sole.
• Push the switch right to open the glass
and pull the switch left to close the
glass.
OPERATING YOUR VEHICLE
39