beautypg.com

Electronic vehicle information center (evic), Compass calibration, Electronic vehicle information – Ram Trucks 2013 3500 - User Guide User Manual

Page 101: Center (evic), Electronics

background image

ELECTRONIC VEHICLE INFORMATION CENTER (EVIC)

• The EVIC features a driver interactive

display that is located in the instru-
ment cluster. Pressing the controls on
the left side of the steering wheel al-
lows the driver to select vehicle infor-
mation and Personal Settings. For ad-
ditional

information,

refer

to

Programmable Features in this guide.

• Press and release the UP

button

to scroll upward through the main
menus (Fuel Economy, Vehicle Info,
Tire PSI, Cruise, Messages, Trip Info,
Vehicle Speed and Turn Menu Off) and sub menus.

• Press and release the DOWN

button to scroll downward through the main

menus and sub menus.

• Press and release the RIGHT

button for access to main menus, sub menus or

to select a personal setting in the setup menu. Press and hold the RIGHT

button for two seconds to reset features.

• Press the BACK/LEFT

button to scroll back to a previous menu or sub menu.

Compass Calibration
• This compass is self-calibrating, which eliminates the need to set the compass

manually. When the vehicle is new, the compass may appear erratic and the EVIC

will display “CAL” until the compass is calibrated.

• You may also calibrate the compass by completing one or more 360 degree turns

(in an area free from large metal or metallic objects) until the “CAL” message

displayed in the EVIC turns off. The compass will now function normally.

ELECTRONICS

99

This manual is related to the following products: