beautypg.com

Air conditioning (a/c), Sync temperature soft-key, Air recirculation – Ram Trucks 2013 3500 - User Guide User Manual

Page 39: Heated mirrors, Parksense® rear park assist, Service the parksense® rear park assist system, Enable/disable parksense, Parksense, Rear park assist, Operating your vehicle

background image

Air Conditioning (A/C)

• If the air conditioning button is pressed while in AUTO mode, the system will exit

AUTO mode and stay in A/C. The mode and blower will be set at the closest mode
and blower position that the system was operating in AUTO.

SYNC Temperature Soft-Key

• Touch the SYNC soft-key on the Uconnect

®

Access radio to control the driver and

passenger temperatures simultaneously. Touch the SYNC soft-key a second time to
control the temperatures individually.

Air Recirculation
• Use recirculation for maximum A/C operation.
• For window defogging, turn the recirculation button off.
• If the Recirculation button is pushed while in the AUTO mode, the indicator light

may flash three times to indicate the cabin air is being controlled automatically.

Heated Mirrors

• The mirrors are heated to melt frost or ice. This feature is activated whenever you

turn on the defroster.

PARKSENSE® REAR PARK ASSIST

• If an object is detected behind the rear bumper while the vehicle is in REVERSE,

a warning will display in the instrument cluster and a tone, that changes speed
depending on the distance of the object from the bumper, will sound.

Service The ParkSense® Rear Park Assist System

• When the ParkSense

®

Rear Park Assist System is malfunctioning, the instrument

cluster will actuate a single chime, once per ignition cycle, and it will display the
“CLEAN PARK ASSIST SENSORS” or the “SERVICE PARK ASSIST SYSTEM”
message.

• If “CLEAN PARK ASSIST SENSORS” appears in the Electronic Vehicle Informa-

tion Center (EVIC) and the rear fascia/bumper is clean and clear of snow, ice, mud,
dirt or other obstruction, see your authorized dealer.

• If “SERVICE PARK ASSIST SYSTEM” appears in the EVIC, see your authorized

dealer.

Enable/Disable ParkSense®

• ParkSense

®

can be enabled and disabled with a switch located in the switch bank

of the instrument panel or through the Customer-Programmable Features section
of the EVIC. When the switch is pressed to disable the system, the instrument
cluster will display the “PARK ASSIST SYSTEM OFF” message for approximately
five seconds.

OPERATING YOUR VEHICLE

37

This manual is related to the following products: