PS Engineering PMA7000H Installation Manual User Manual
PS Engineering Accessories communication

9800 Martel Road
Lenoir City, TN 37772
P
P
M
M
A
A
7
7
0
0
0
0
0
0
H
H
Document P/N 200-780-0429
Rev. 4 December 2012
Audio Selector Panel with Marker Beacon Receiver
High-fidelity Stereo Intercom
System Installation and Operation Manual
FAA-Approved TSO C50c, C35d
JAA-Approved JTSO C50c, 2C35d
Patented under one or more of the following; No. 5,903,227; 6,160,496 and
6,493,450
PS Engineering, Inc. 2012©
Copyright Notice
Any reproduction or retransmittal of this publication, or any portion thereof, without the expressed written permission of PS
Engineering, Inc. is strictly prohibited. For further information contact the Publications Manager at PS Engineering, Inc., 9800
Martel Road, Lenoir City, TN 37772. Phone (865) 988-9800, email [email protected].
In certified aircraft, warranty is not valid unless this product is installed by an
Authorized PS Engineering dealer.
PMA7000H
Document Outline
- Section I GENERAL INFORMATION
- Section II - Installation
- GENERAL INFORMATION
- Unpacking and Preliminary Inspection
- Equipment Installation Procedures
- Cable Harness Wiring
- Marker Beacon Installation
- Adjustments
- Communications Antenna Installation Notes
- PMA7000H Pin assignments
- Post Installation Checkout
- Unit Installation
- Cellular Interface Checkout
- Final Inspection
- Section III OPERATION
- Section IV- Warranty and Service
- Appendix A – PMA7000H Installation Drawing
- Appendix B Bottom Connector Interconnect
- Appendix C Top Connector Interconnect
- Appendix D- Instructions for FAA Form 337 and continuing air
- worthiness
- Appendix E RTCA DO160C (EUROCAE ED-14) Environmental Quali
- fication Form