CMS Products 674 - Manual (Page 61)

HotCup Operators’ Guide Hot Drink Setup
November, 2007 55 6740001
SET THE MACHINE TYPE CONFIGURATION CODE
(Supervisor Mode Only)
a. Press , then press until the display shows Mach.type (x).
b. Press to enter MACH.TYPE (1).
c. Press . The display shows CONF WXYZ "WXYZ" is the machine configuration code.
c. Press until the display shows D+J+ WXYZ. “D” is the automatic delivery door status.
A plus sign (+) means the door is on; a dash (-) means the door is off. Toggle this setting by
pressing . “J” is the whipper setting. Toggle a plus sign (+) or a dash (-) with the J key.
(See “Whipper Options” on page 50).
“W” represents the machine type, “X” is the soup and sugar substitute configuration, “Y” is the
brewer configuration, and “Z” is canister mapping. The following tables give the possible
values for each of the four numbers. Enter the appropriate configuration code for your
machine.
d. CONTINUE.
MACHINE TYPE CONFIGURATION
ENTER
FOR (W)
DEFINITION
1 Freeze Dried Use
5 Single Fresh Brew or Dual Fresh Brew
SOUP AND SUGAR SUBSTITITUE CONFIGURATION
ENTER
FOR (X)
DEFINITION
1 Canister 5 is not used
2 Canister 5 present, but receives no condiments
3 Canister 5 present, may receive condiments
4 Water Only