CMS Products 674 - Manual (Page 46)

Programming Procedures HotCup Operators’ Guide
6740001 40 November, 2007
SET PRINTER OR DEX OPTIONS
a. Follow the steps in (See “Gain Access to the Supervisor Mode” on page 38).
b. Press until the display shows:
PRINTER means that data will be sent directly to a printer,
OR
DEX ONLY means that data remains in memory after it is downloaded into a portable data
collection device (PDCD),
OR
DEX +CLR means that resettable data is cleared after it is downloaded into a PDCD.
c. Press to change between the three choices.
d. CONTINUE.
LOCK OR UNLOCK DATA CLEARING ACCESS
a. Follow the steps in (See “Gain Access to the Supervisor Mode” on page 38).
b. Press until the display shows either # . LOCKED or
# . UNLOCKED . LOCKED means that non-supervisors cannot clear resettable machine
sales and vend data from the key.
c. Press to switch between # . LOCKED and # . UNLOCKED .
NOTE
The supervisor can clear data regardless of this setting, provided
the supervisor code was correctly entered first.
d. CONTINUE
SELECT DISPLAY LANGUAGE
a. Press . The current LANGUAGE is shown in the display. Press to choose the
desired language. Your choices are: ENGLISH , DEUTSCH , FRANCAIS , ESPANOL ,
PORTUGUESE , SWEDISH , or NEDERLANDS .
b. CONTINUE.