PRG Mbox Director User Manual v3.6.1 User Manual
Page 19
MBOX
®
DIRECTOR USER MANUAL
13
Step
3. Once an MBOX server is chosen, the IP Address, Art-Net Universe, Art-Net Channel, # of Layers, and DMX
Profile fields will be populated according to the settings configured in the MBOX server Setup window.
(Note: If any of these values or settings are changed here at the MBOX Director Add Fixture window, the
conflicting value will be highlighted, but will not be changed at the actual MBOX server.)
Step
4. At Name field, enter custom name if desired. (The name can be edited after the fixture has been created.)
Step
5. When complete, click Add button to add (patch) the fixture.
Step
6. If connecting to multiple MBOX servers, repeat steps 1-7 until all servers have been added. When finished,
close Add Fixture window. The main window will now reflect the added fixture(s).
Mbox Media Server Training Video Chapter 4: Patching
Name Field (enter custom name, if desired)
Settings from
MBOX Server
Director
Fixture Settings