Adding fixtures, Oceed to – PRG Mbox Director User Manual v3.6.1 User Manual
Page 18
12
MBOX
®
DIRECTOR USER MANUAL
Adding Fixtures
Once the network is configured and the MBOX servers are connected, the servers will need to be added to MBOX
Director so they can be controlled. The "Add Fixture" window is used to locate MBOX servers on the network.
Before adding fixtures, it is a good idea to configure the DMX Profile type at the MBOX server’s Setup window
(such as Single Output, Panoramic Dual, Dual Independent, etc.) For more information, refer to
Configuration / Using Dual Output Features"
Note: Refer to
on page 3 for definitions of "Fixture" and "Server."
To add fixtures:
Step
1. At MBOX Director main screen, click Add Fixture icon [+]. (If no servers are connected, the button will be
flashing.)
Step
2. At "Choose from detected Mboxes" list, select MBOX server. (If the network settings are configured
properly, the servers will appear in this list.)
Sample MBOX
Fixture List (Connected Servers)
Add Fixture
Delete Fixture
Art-Net
Server Setup:
Server IP
DMX Profile
Active Layers
Server Name
The choices here will depend
on your particular setup.