PRG Mbox Director User Manual v3.8a - Manual (Page 92)

86 MBOX ® DIRECTOR USER MANUAL
IP Address Changed
If "IP Address changed!" is displayed in the server icon, it means that either the Mbox server has been
plugged into a different Ethernet port
or the network configuration has been changed.
To correct:
Step 1. Be sure your Ethernet cables are not swapped.
Step 2. Bring up the tooltip help and note the new IP address that is displayed.
Step 3. Right-click on the server icon and select Change Configuration from the pop-up menu.
Step 4. Use "Choose from detected Mboxes" pop-up menu to locate new IP address and press Save . The error
should clear.