PRG Mbox Director User Manual v3.8a - Manual (Page 42)

36 MBOX ® DIRECTOR USER MANUAL
QUICK START
Up and Running
Mbox Director is a powerful program which can be used to configure an extensive number of layer parameters and
scenes. However, it is not difficult to quickly select some media content and preview it in the Mbox server window.
(Once you are familiar with the basic operations and verify that the media will play on the Mbox server, scenes can be
created with more complex layer configurations.)
Quick Start:
Step 1. Install Mbox Director and set up proper communication between the application and at least one Mbox
server. Refer to "Installation and Setup" on page 4.
Step 2. Be sure that both Mbox Director and Mbox applications are running.
Step 3. At Mbox Director window, click on Layer 1 icon box.
Step 4. Using slider control, raise opacity to full (255).
Step 5. At Mbox window, click on Mbox tab to enable feedback. At this point, a white box should be displayed.
Layer 1 Icon Box (click to select) Opacity Slider
Media Picker Icon (click to open Media Picker)
Mbox Tab Preview Area