Philips FW754P37 - Manual (Page 26)

RECORDING
IT IS RECOMMENDED THAT YOU SWITCH OFF
DOLBY PRO LOGIC WHEN RECORDING.
Notes:
- For recording, use only tape of lEC type I (normal tape).
- The tape is secured at both ends with leader tape. At
the beginning and end of tape, nothing will be
recorded for six to seven seconds.
- The recording level is set automatically, regardless of
the position of VOLUME or DBB.
- To prevent accidental recording, break out the tab on
the left shoulder of the tape side.
One Touch Recording
• For One Touch recording, as soon as you press
RECORD, the current source will be recorded on tape
deck 1.
1
Load a blank tape in tape deck 1.
2 Press RECORD on tape deck 1 to start recording.
The REC flag starts flashing.
3 Press PAUSE to interrupt recording.
4 Press STOP»OPEN on tape deck 1 to stop recording.
Recording from other sources (only on tape
deck 1)____ __________________________________
Load a blank tape into tape deck 1.
Press CD, TUNER orAUX
Start playback of the selected source.
Press RECORD on tape deck 1 to start recording.
— The REC flag starts flashing.
Press PAUSE to interrupt recording.
Press STOP*OPEN on tape deck 1 to stop recording.
Note:
- During recording, it is not possible to listen to another
sound source.
CD Synchro Start Recording________________
During CD synchro start recording;
• It it not advisable to fast forward/rewind your tape in
tape deck 2.
• It is not possible to listen to another sound source.
Load a blank tape into tape deck 1 and a disc into the
disc tray.
Select CD and start playback.
You can program the tracks in the order you want them
to be recorded (see Programming Tracks). If not, the
tracks are recorded according to the selected disc.
Press RECORD on tape deck 1 to start recording.
The REC flag starts flashing.
Press PAUSE to interrupt recording.
Press STOP*OPEN on tape deck 1 to stop recording
and STOP ■ to stop CD playback.
26