Dolb^protqilf, Dolby center phantom, Dolby 3 stereo – Philips FW754P37 User Manual

Page 16: Normal stereo, Important

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

DOlB^PROtQilf

Dolby Center Phantom

This setting is for use without the center speaker. It
redistributes the center channel information to the left
and right speakers providing conventional stereo across
the front.

FRONT

LEFT

• Press DPL PHANTOIVHo select Dolby Pro Logic

Center Phantom mode.

-* The message TEffTCR Pfi'iTfJTOfT' will be

Dolby 3 Stereo

This setting is for use where full surround is not required,

but a wide stereo sound is desirable. It only requires the
left, right and center speakers.

FRONT

LEFT

SURROUND

RIGHT

• Press DPL 3 STEREO Xo select Dolby 3 Stereo mode.

The message "SuLSb' 3

STEREO"

will be

displayed.

Normal Stereo

This setting is for normal stereo sound without Dolby Pro

Logic. It only requires the left and right speakers.

FRONT

LEFT

• Press DPL to select Stereo mode.

-* The message "STEREO" will be displayed.

Note:

- When in DPL mode, pressing the

respective DPL button on the

system again (until the button is

not lighted! will switch to normal

stereo mode.

PRO LOGIC PHANTOM 3 STEREO

Important!

1. To listen to the optimum Dolby Pro Logic sound effect,

it is recommended to switch on DPL in combination

with "Classic".

2. It is recommended to switch off Dolby Pro Logic when

you do recording on a tape.